How does jigsaw work

What Jigsaw Sizes Are Available? How Much Do Jigsaws Weigh? What Is Orbital Action? Can Jigsaw Blades Be Sharpened?

How To Use A Jigsaw? Jigsaw Maintenance And Care. Chris 1st January Save Saved Removed 0. How does a jigsaw work? Amazon Associate Partners. About Us. For metal blades, this number can rise to 36 teeth per inch.

Read More: Types of Jigsaw Blade. If you need to make plunge cuts, it is recommended to drill the first hole if the material is hard or thick.

Otherwise, you can use your jigsaw. Simply locate the adjustment screw, loosen it, adjust the shoe to the required angle then fasten the screw. Once everything is properly set up, align the saw with the cut line then run the blade at full speed before making contact.

If making a straight cut, make sure you use a guide rail to maintain high accuracy. If cutting very tight curves, ensure to make relief cuts to prevent the blade from binding. To achieve this, run the saw while pressing it down using both hands. Safety Tip : While using a jigsaw, remember to cover your eyes, nose, and mouth using safety goggles and a dust mask respectively.

A jigsaw can be used to cut vertically, but it is recommended to fit it with a flush-cut blade. This is because as you get closer to the ground, the shoe will contact the floor first before the blade. However, a flush-cut blade extends further outwards than the shoe to complete the cut. This is possible, but you need a powerful jigsaw and a long, stiff blade with few teeth per inch.

Also, a bi-metal blade should be used because the thickness makes it tough. Most high carbon steel blades can only cut through 1. It's that simple. You might think you need a fancy adjustable table saw to make bevel cuts angled cuts rather than sawing through straight up and down.

In fact, most jigsaws can be angled up to 45 degrees for bevel cuts. Look for a lever just above the shoe of the saw that slides back and forth. When released the saw will tilt to one side and then pull the lever back to lock it in place.

Cordless jigsaws are a dream to use because you can twist and turn the jigsaw to your heart's content, cutting elaborate curves without being impeded by a dangling cord or worrying about accidentally cutting it. Jigsaws used to be a bit unwieldy but the newer generation, especially the battery-powered variety, are lightweight and slim.

With the proper instruction and adult supervision, children of various ages can use a jigsaw safely. The tool rests on the surface of what it is cutting, so it doesn't require a grown-up's strength to hold it in place. Fingers and hands can be easily kept clear of the blade. Jigsaws, then, are a great first power tool to introduce to children.

Out of the box, jigsaws are easy and straightforward to use regardless of your experience level. Insert the blade, plug in the tool or pop in the battery if it's cordless , and you are ready to start cutting.